LDAP Account Manager

courierMailAlias extends baseModule
in package

modules

Enable the account for Courier Mail Service Aliases

ATTRIBUTES_TO_IGNORE_ON_COPY_DEFAULT

These attributes will be ignored by default if a new account is copied from an existing one.


    public
        mixed
    ATTRIBUTES_TO_IGNORE_ON_COPY_DEFAULT
    = array('uid', 'uidNumber', 'gid', 'gidNumber', 'cn', 'userpassword', 'sn', 'givenName', 'initials', 'telephoneNumber', 'homePhone', 'mobile', 'facsimileTelephoneNumber', 'pager', 'mail', 'employeeNumber', 'userCertificate;binary', 'userCertificate', 'homeDirectory', 'unixHomeDirectory', 'jpegPhoto')

$attributes

contains all ldap attributes which should be written


    protected
        mixed
    $attributes

$autoAddObjectClasses

if true, managed object classes are added when an account is created or loaded (default: true)


    protected
        mixed
    $autoAddObjectClasses
     = \true

$messages

contains all error messages of a module


    protected
        mixed
    $messages

$meta

includes all meta data provided by the sub class


    protected
        mixed
    $meta

$moduleSettings

configuration settings of all modules


    protected
        mixed
    $moduleSettings

$orig

contains all ldap attributes which are loaded from ldap


    protected
        mixed
    $orig

$selfServiceSettings

self service profile with settings of all modules


    protected
        selfServiceProfile
    $selfServiceSettings

profile

$base

name of parent accountContainer ($_SESSION[$base])


    private
        mixed
    $base

$scope

the account type of this module (user, group, host)


    private
        mixed
    $scope

__construct()

Creates a new base module class


    public
                    __construct(string $scope) : mixed

Parameters

$scope : string: the account type (user, group, host)

Return values

mixed —

addPDFImage()

Adds an image to the PDF.


    public
                    addPDFImage(array<string|int, mixed> &$result, string $attrName) : mixed

Parameters

$result : array<string|int, mixed>: result array (entry will be added here)
$attrName : string: attribute name

Return values

mixed —

addPDFKeyValue()

Adds a simple PDF entry with the given key and value.


    public
                    addPDFKeyValue(array<string|int, mixed> &$result, string $name, string $label, mixed $value[, string $delimiter = ', ' ]) : mixed

Parameters

$result : array<string|int, mixed>: result array (entry will be added here)
$name : string: ID
$label : string: label name
$value : mixed: value as String or array
$delimiter : string = ', ': delimiter if value is array (default: ", ")

Return values

mixed —

addPDFTable()

Adds a table entry to the PDF.


    public
                    addPDFTable(array<string|int, mixed> &$result, string $name, PDFTable $table) : mixed

Parameters

$result : array<string|int, mixed>: result array (entry will be added here)
$name : string: ID
$table : PDFTable: table

Return values

mixed —

build_uploadAccounts()

In this function the LDAP accounts are built.


    public
                    build_uploadAccounts(mixed $rawAccounts, mixed $ids, mixed &$partialAccounts, mixed $selectedModules, mixed &$type) : array<string|int, mixed>

Parameters

$rawAccounts : mixed: the user input data, contains one subarray for each account.
$ids : mixed: list of IDs for column position (e.g. "posixAccount_uid" => 5)
$partialAccounts : mixed: list of hash arrays (name => value) which are later added to LDAP
$selectedModules : mixed: list of selected account modules
$type : mixed: account type

Return values

array<string|int, mixed> —

list of error messages if any

can_manage()

Returns true if this module can manage accounts of the current type, otherwise false.


    public
                    can_manage() : bool

Return values

bool —

true if module fits

canSelfServiceFieldBeReadOnly()

Returns if a given self service field can be set in read-only mode.


    public
                    canSelfServiceFieldBeReadOnly(string $fieldID, selfServiceProfile $profile) : bool

Parameters

$fieldID : string: field identifier
$profile : selfServiceProfile: currently edited profile

Return values

bool —

may be set read-only

canSelfServiceFieldBeRelabeled()

Returns if a self service field can be relabeled.


    public
                    canSelfServiceFieldBeRelabeled(string $fieldID, selfServiceProfile $profile) : bool

Parameters

$fieldID : string: field ID
$profile : selfServiceProfile: currently edited profile

Return values

bool —

may be relabeled

check_configOptions()

Checks input values of module settings.


    public
                    check_configOptions(array<string|int, mixed> $typeIds, array<string|int, mixed> &$options) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

If the input data is invalid the return value is an array that contains subarrays to build StatusMessages ('message type', 'message head', 'message text').
If no errors occurred the function returns an empty array.

Parameters

$typeIds : array<string|int, mixed>: list of account type ids which are used
$options : array<string|int, mixed>: hash array (option name => value) that contains the input. The option values are all arrays containing one or more elements.

Return values

array<string|int, mixed> —

list of error messages

check_profileOptions()

Checks input values of account profiles.


    public
                    check_profileOptions(array<string|int, mixed> $options, string $typeId) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

$options is an hash array (option name => value) that contains the user input. The option values are all arrays containing one or more elements.
If the input data is invalid the return value is an array that contains arrays to build StatusMessages (message type, message head, message text). If no errors occurred the function returns an empty array.

Parameters

$options : array<string|int, mixed>: a hash array (name => value) containing the user input
$typeId : string: type id (user, group, host)

Return values

array<string|int, mixed> —

list of error messages (array(type, title, text)) to generate StatusMessages, if any

checkGlobalConfigOptions()

Checks the global config options.


    public
                    checkGlobalConfigOptions(array<string|int, mixed> &$options, array<string|int, string> &$messages, array<string|int, string> &$errors) : void

Parameters

$options : array<string|int, mixed>: config options
$messages : array<string|int, string>: info messages can be added here
$errors : array<string|int, string>: error messages can be added here

Return values

void —

checkSelfServiceOptions()

Checks if all input values are correct and returns the LDAP attributes which should be changed.


    public
                    checkSelfServiceOptions(string $fields, array<string|int, mixed> $attributes, bool $passwordChangeOnly, array<string|int, mixed> $readOnlyFields) : array<string|int, mixed>

Return values:
messages: array of parameters to create status messages
add: array of attributes to add
del: array of attributes to remove
mod: array of attributes to modify
info: array of values with informational value (e.g. to be used later by pre/postModify actions)

Calling this method does not require the existence of an enclosing .

Parameters

$fields : string: input fields
$attributes : array<string|int, mixed>: LDAP attributes
$passwordChangeOnly : bool: indicates that the user is only allowed to change his password and no LDAP content is readable
$readOnlyFields : array<string|int, mixed>: list of read-only fields

Return values

array<string|int, mixed> —

messages and attributes (array('messages' => [], 'add' => array('mail' => array('test@test.com')), 'del' => [], 'mod' => [], 'info' => []))

checkSelfServiceSettings()

Checks if the self service settings are valid.


    public
                    checkSelfServiceSettings(array<string|int, mixed> &$options, selfServiceProfile &$profile) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

If the input data is invalid the return value is an array that contains arrays to build StatusMessages (message type, message head, message text). If no errors occurred the function returns an empty array.

Parameters

$options : array<string|int, mixed>: hash array (option name => value) that contains the input. The option values are all arrays containing one or more elements.
$profile : selfServiceProfile: self service profile

Return values

array<string|int, mixed> —

error messages

delete_attributes()

This function returns an array with the same syntax as save_attributes().


    public
                    delete_attributes() : array<string|int, mixed>

Calling this method requires the existence of an enclosing .

It allows additional LDAP changes when an account is deleted.

Return values

array<string|int, mixed> —

of LDAP operations, same as for save_attributes()

display_html_attributes()

This function creates meta HTML code to display the module page.


    public
                    display_html_attributes() : htmlElement

Return values

htmlElement —

meta HTML object

display_html_delete()

This function creates meta HTML code which will be displayed when an account should be deleted.


    public
                    display_html_delete() : htmlElement

Calling this method requires the existence of an enclosing .

This can be used to interact with the user, e.g. should the home directory be deleted? The output of all modules is displayed on a single page.

Return values

htmlElement —

meta HTML object

displaySpecialSelfServicePage()

This function creates meta HTML code to display the module specific page for the self service.


    public
                    displaySpecialSelfServicePage(selfServiceProfile $profile) : htmlElement

Parameters

$profile : selfServiceProfile: self service settings

Return values

htmlElement —

meta HTML object

doUploadPostActions()

This function is responsible to do additional tasks after the account has been created in LDAP (e.g. modifying group memberships, adding Quota etc..).


    public
                    doUploadPostActions(array<string|int, mixed> &$data, array<string|int, mixed> $ids, array<string|int, mixed> $failed, array<string|int, mixed> &$temp, array<string|int, mixed> &$accounts, array<string|int, string> $selectedModules, ConfiguredType $type) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

This function is called as long as the returned status is 'finished'. Please make sure that one function call lasts no longer than 3-4 seconds. Otherwise the upload may fail because the time limit is exceeded. You should not make more than one LDAP operation in each call.

Parameters

$data : array<string|int, mixed>: array containing one account in each element
$ids : array<string|int, mixed>: maps the column names to keys for the sub arrays (array(<column_name> => ))
$failed : array<string|int, mixed>: list of account numbers which could not be successfully uploaded to LDAP
$temp : array<string|int, mixed>: variable to store temporary data between two post actions
$accounts : array<string|int, mixed>: list of LDAP entries
$selectedModules : array<string|int, string>: selected account modules
$type : ConfiguredType: account type

Return values

array<string|int, mixed> —

current status
array (
'status' => 'finished' | 'inProgress' // defines if all operations are complete
'progress' => 0..100 // the progress of the operations in percent
'errors' => array // list of arrays which are used to generate StatusMessages
)

doUploadPreActions()

Runs any actions that need to be done before an LDAP entry is created.


    public
                    doUploadPreActions(array<string|int, mixed> $attributes, ConfiguredType $type) : array<string|int, mixed>

Parameters

$attributes : array<string|int, mixed>: LDAP attributes of this entry (attributes are provided as reference, handle modifications of $attributes with care)
$type : ConfiguredType: account type

Return values

array<string|int, mixed> —

array which contains status messages. Each entry is an array containing the status message parameters.

get_alias()

Returns an alias name for the module.


    public
                    get_alias() : string

Calling this method does not require the existence of an enclosing .

This function returns a more descriptive string than the class name. Alias names are used for the buttons on the account pages and the module selection in the configuration wizard.
Please take care that your alias name is not too long. It may contain any character but should not include parts that may be interpreted by the browser (e.g. '<' or '>'). If you use different aliases dependent on the account type please make sure that there is a general alias for unknown types.

Return values

string —

alias name

get_configOptions()

Returns a list of configuration options.


    public
                    get_configOptions(array<string|int, mixed> $scopes, array<string|int, mixed> $allScopes) : mixed

Calling this method does not require the existence of an enclosing .

The field names are used as keywords to load and save settings. We recommend to use the module name as prefix for them (e.g. posixAccount_homeDirectory) to avoid naming conflicts.

Parameters

$scopes : array<string|int, mixed>: account types (user, group, host)
$allScopes : array<string|int, mixed>: list of all active account modules and their account type id (module => array(type id))

Return values

mixed —

htmlElement or array of htmlElement

get_dependencies()

This function returns a list with all depending and conflicting modules.


    public
                    get_dependencies() : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

The return value is an array with two sub arrays, "depends" and "conflicts". All values of the conflict array are string values with module names. All values of the depends array are either string values with module names or arrays which include only string values with module names.
If an element of the depends array is itself an array, this means that your module depends on one of these modules.

Example: return array("depends" => array("posixAccount", array("qmail", "sendmail")), "conflicts" => array("exim"))

Return values

array<string|int, mixed> —

list of dependencies and conflicts

get_help()

This function returns the help entry array for a specific help id.


    public
                    get_help(string $id) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

The result is an hashtable with the following keys:

Headline (required)
The headline of this help entry. Can consist of any alphanumeric characters. No HTML/CSS elements are allowed.
Text (required)
The text of the help entry which may contain any alphanumeric characters.
SeeAlso (optional)
A reference to another related web site. It must be an array containing a field called "text" with the link text that should be displayed and a field called "link" which is the link target.

Example:

array('Headline' => 'This is the head line', 'Text' => 'Help content', 'SeeAlso' => array('text' => 'LAM homepage', 'link' => 'http://www.ldap-account-manager.org/'))

Parameters

$id : string: The id string for the help entry needed.

Return values

array<string|int, mixed> —

The desired help entry.

get_ldap_filter()

Returns an LDAP filter for the account lists


    public
                    get_ldap_filter(string $typeId) : string

Calling this method does not require the existence of an enclosing .

Returns an array('or' => '...', 'and' => '...') that is used to build the LDAP filter. Usually, this is used to filter object classes. All "or" filter parts of the base modules are combined with OR and then combined with the "and" parts.
The resulting LDAP filter will look like this: (&(|(OR1)(OR2)(OR3))(AND1)(AND2)(AND3))

Example: return array('or' => '(objectClass=posixAccount)', 'and' => '(!(uid=*$))')

Parameters

$typeId : string: account type id

Return values

string —

LDAP filter

get_metaData()

This function provides meta data which is interpreted by baseModule.


    public
                    get_metaData() : array<string|int, mixed>

Return values

array<string|int, mixed> —

meta data

get_pdfEntries()

Returns the PDF entries for this module.


    public
                    get_pdfEntries(mixed $pdfKeys, mixed $typeId) : array<string|int, PDFEntry>

Parameters

$pdfKeys : mixed: list of PDF keys that are included in document
$typeId : mixed: type id (user, group, host)

Return values

array<string|int, PDFEntry> —

list of key => PDFEntry

get_pdfFields()

Returns a hashtable with all entries that may be printed out in the PDF.


    public
                    get_pdfFields(string $typeId) : array<string|int, mixed>

Parameters

$typeId : string: type id (user, group, host)

Return values

array<string|int, mixed> —

PDF entries as key => label

get_profileOptions()

This function defines what attributes will be used in the account profiles and their appearance in the profile editor.


    public
                    get_profileOptions(string $typeId) : htmlElement

Calling this method does not require the existence of an enclosing .

The return value is an object implementing htmlElement.
The field name are used as keywords to load and save profiles. We recommend to use the module name as prefix for them (e.g. posixAccount_homeDirectory) to avoid naming conflicts.

Parameters

$typeId : string: type id (user, group, host, ...)

Return values

htmlElement —

meta HTML object

get_RDNAttributes()

Returns a hash array containing a list of possible LDAP attributes that can be used to form the RDN (Relative Distinguished Name).


    public
                    get_RDNAttributes(string $typeId) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

The returned elements have this form: =>
is the name of the LDAP attribute
defines the priority of the attribute (can be "low", "normal", "high")

Example: return array('uid' => 'normal', 'cn' => 'low')

Parameters

$typeId : string: account type

Return values

array<string|int, mixed> —

list of attributes

get_scope()

Returns the account type of this module (user, group, host)


    public
                    get_scope() : string

Return values

string —

account type

get_uploadColumns()

Returns an array containing all input columns for the file upload.


    public
                    get_uploadColumns(array<string|int, mixed> $selectedModules, ConfiguredType &$type) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

This function returns an array which contains subarrays which represent an upload column. Syntax of column arrays:

array(
string: name, // fixed non-translated name which is used as column name (should be of format: _)
string: description, // short descriptive name
string: help, // help ID
string: example, // example value
string: values, // possible input values (optional)
string: default, // default value (optional)
boolean: required // true, if user must set a value for this column
boolean: unique // true if all values of this column must be different values (optional, default: "false")
)

Parameters

$selectedModules : array<string|int, mixed>: list of selected account modules
$type : ConfiguredType: account type

Return values

array<string|int, mixed> —

column list

get_uploadPreDepends()

Returns a list of module names which must be processed in building the account before this module.


    public
                    get_uploadPreDepends() : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

The named modules may not be active, LAM will check this automatically.

Return values

array<string|int, mixed> —

list of module names

getAttributes()

Returns the LDAP attributes which are managed in this module.


    public
                    getAttributes() : array<string|int, mixed>

Return values

array<string|int, mixed> —

attributes

getButtonStatus()

Controls if the module button the account page is visible and activated.


    public
                    getButtonStatus() : string

Calling this method requires the existence of an enclosing .

Possible return values:

enabled: button is visible and active
disabled: button is visible and deactivated (greyed)
hidden: no button will be shown

Return values

string —

status ("enabled", "disabled", "hidden")

getGlobalConfigOptions()

Returns a list of config options for LAM's main configuration.


    public
                    getGlobalConfigOptions(array<string|int, mixed> $currentSettings) : array<string|int, htmlElement>

Parameters

$currentSettings : array<string|int, mixed>: current settings

Return values

array<string|int, htmlElement> —

config options

getIcon()

Returns the path to the module icon.


    public
                    getIcon() : unknown

The path must be relative to graphics (e.g. key.png) or an URL (/icons/icon.png or http://server/icon.png). You can also set $this->meta['icon']. The preferred size is 32x32px.

Return values

unknown —

getLDAPAliases()

Returns a list of aliases for LDAP attributes.


    public
                    getLDAPAliases(string $typeId) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

All alias attributes will be renamed to the given attribute names.

Parameters

$typeId : string: type id (user, group, host)

Return values

array<string|int, mixed> —

list of aliases like array("alias name" => "attribute name")

getLinkToSpecialSelfServicePage()

This allows modules to create a link to a module specific page for the self service.


    public
                    getLinkToSpecialSelfServicePage(array<string|int, mixed> $settings) : string

The link is shown on the login page of the self service. You can use this to provide e.g. a page to reset passwords.

Parameters

$settings : array<string|int, mixed>: self service settings

Return values

string —

link text (null if no special page used)

getListAttributeDescriptions()

Returns a list of attribute descriptions for the account list.


    public
                    getListAttributeDescriptions(ConfiguredType $type) : array<string|int, mixed>

Parameters

$type : ConfiguredType: type

Return values

array<string|int, mixed> —

attribute name => description label

getListFilterFunction()

Returns a callable if there should be a custom filtering for the given attribute name.


    public
                    getListFilterFunction(string $attributeName) : callable|null

Parameters

$attributeName : string: attribute name

Return values

callable|null —

custom function for filtering (?array $values, ?string $filterValue)

getListRenderFunction()

Returns a callable if there should be a custom display for the given attribute name.


    public
                    getListRenderFunction(string $attributeName) : callable|null

Parameters

$attributeName : string: attribute name

Return values

callable|null —

custom function for rendering (array $entry, string $attribute)

getManagedAttributes()

Returns a list of LDAP attributes which are managed by this module.


    public
                    getManagedAttributes(string $typeId) : array<string|int, mixed>

All attribute names will be renamed to match the given spelling.

Parameters

$typeId : string: type id (user, group, host)

Return values

array<string|int, mixed> —

list of attributes

getManagedHiddenAttributes()

Returns a list of operational LDAP attributes which are managed by this module and need to be explicitly set for LDAP search.


    public
                    getManagedHiddenAttributes(string $typeId) : array<string|int, mixed>

Parameters

$typeId : string: account type id

Return values

array<string|int, mixed> —

list of hidden attributes

getManagedObjectClasses()

Returns a list of managed object classes for this module.


    public
                    getManagedObjectClasses(string $typeId) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

This is used to fix spelling errors in LDAP-Entries (e.g. if "posixACCOUNT" is read instead of "posixAccount" from LDAP).

Example: return array('posixAccount')

Parameters

$typeId : string: type id (user, group, host)

Return values

array<string|int, mixed> —

list of object classes

getOriginalAttributes()

Returns the LDAP attributes which are managed in this module (with unchanged values).


    public
                    getOriginalAttributes() : array<string|int, mixed>

Return values

array<string|int, mixed> —

attributes

getRequiredExtensions()

This function returns a list of PHP extensions (e.g. hash) which are needed by this module.


    public
                    getRequiredExtensions() : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

Return values

array<string|int, mixed> —

extensions

getSelfServiceFields()

Returns a list of possible input fields and their descriptions.


    public
                    getSelfServiceFields() : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

Format: array( => )

Return values

array<string|int, mixed> —

fields

getSelfServiceOptions()

Returns the meta HTML code for each input field.


    public
                    getSelfServiceOptions(array<string|int, mixed> $fields, array<string|int, mixed> $attributes, bool $passwordChangeOnly, array<string|int, mixed> $readOnlyFields) : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

It is not possible to display help links.

Parameters

$fields : array<string|int, mixed>: list of active fields
$attributes : array<string|int, mixed>: attributes of LDAP account
$passwordChangeOnly : bool: indicates that the user is only allowed to change his password and no LDAP content is readable
$readOnlyFields : array<string|int, mixed>: list of read-only fields

Return values

array<string|int, mixed> —

list of meta HTML elements (field name => htmlResponsiveRow)

getSelfServiceSearchAttributes()

This function returns a list of possible LDAP attributes (e.g. uid, cn, ...) which can be used to search for LDAP objects.


    public
                    getSelfServiceSearchAttributes() : array<string|int, mixed>

Calling this method does not require the existence of an enclosing .

Return values

array<string|int, mixed> —

attributes

getSelfServiceSettings()

Returns a list of self service configuration settings.


    public
                    getSelfServiceSettings(selfServiceProfile $profile) : htmlElement

Calling this method does not require the existence of an enclosing .

The name attributes are used as keywords to load and save settings. We recommend to use the module name as prefix for them (e.g. posixAccount_homeDirectory) to avoid naming conflicts.

Parameters

$profile : selfServiceProfile: currently edited profile

Return values

htmlElement —

meta HTML object

getSupportedJobs()

Returns a list of jobs that can be run.


    public
                    getSupportedJobs(LAMConfig &$config) : mixed

Parameters

$config : LAMConfig: configuration

Return values

mixed —

getWildCardReplacements()

Returns a list of wildcards that can be replaced in input fields.


    public
                    getWildCardReplacements() : array<string|int, mixed>

E.g. "$firstname" is replaced with "givenName" attribute value.

Return values

array<string|int, mixed> —

replacements as wildcard => value

handleAjaxRequest()

Manages AJAX requests.


    public
                    handleAjaxRequest() : mixed

This function may be called with or without an account container.

Return values

mixed —

hasOnlyVirtualChildren()

Defines if the LDAP entry has only virtual child entries. This is the case for e.g. LDAP views.


    public
                    hasOnlyVirtualChildren() : bool

Return values

bool —

has only virtual children

init()

Initializes the module after it became part of an {@link accountContainer}


    public
                    init(string $base) : mixed

Calling this method requires the existence of an enclosing .

Parameters

$base : string: the name of the object ($_SESSION[$base])

Return values

mixed —

is_base_module()

Returns true if your module is a base module and otherwise false.


    public
                    is_base_module() : bool

Calling this method does not require the existence of an enclosing .

Every account type needs exactly one base module. A base module manages a structural object class. E.g. the inetOrgPerson module is a base module since its object class is structural.

Return values

bool —

true if base module (defaults to false if no meta data is provided)

load_attributes()

This function loads the LDAP attributes when an account should be loaded.


    public
                    load_attributes(array<string|int, mixed> $attributes) : mixed

Calling this method requires the existence of an enclosing .

By default this method loads the object classes and accounts which are specified in and .

Parameters

$attributes : array<string|int, mixed>: array like the array returned by get_ldap_attributes(dn of account) but without count indices

Return values

mixed —

load_Messages()

This function fills the $messages variable with output messages from this module.


    public
                    load_Messages() : mixed

Return values

mixed —

load_profile()

This function loads the values from an account profile to the module's internal data structures.


    public
                    load_profile(array<string|int, mixed> $profile) : mixed

Calling this method does not require the existence of an enclosing .

Parameters

$profile : array<string|int, mixed>: hash array with profile values (identifier => value)

Return values

mixed —

loadAttributesFromAccountCopy()

Loads the LDAP data from an account to copy.


    public
                    loadAttributesFromAccountCopy(array<string|int, mixed> $ldapAttributes[, array<string|int, mixed> $attributesToIgnore = [] ]) : void

Parameters

$ldapAttributes : array<string|int, mixed>: LDAP attributes of copy
$attributesToIgnore : array<string|int, mixed> = []: list of attributes to ignore during load (defaults to self::ATTRIBUTES_TO_IGNORE_ON_COPY_DEFAULT)

Return values

void —

module_complete()

This function is used to check if all settings for this module have been made.


    public
                    module_complete() : bool

Calling this method requires the existence of an enclosing .

This function tells LAM if it can create/modify the LDAP account. If your module needs any additional input then set this to false. The user will be notified that your module needs more input.
This method's return value defaults to true.

Return values

bool —

true, if settings are complete

module_ready()

This function is used to check if this module page can be displayed.


    public
                    module_ready() : bool

Calling this method requires the existence of an enclosing .

Your module might depend on input of other modules. This function determines if the user can change to your module page or not. The return value is true if your module accepts input, otherwise false.
This method's return value defaults to true.

Return values

bool —

true, if page can be displayed

postDeleteActions()

Allows the module to run commands after the LDAP entry is deleted.


    public
                    postDeleteActions() : array<string|int, mixed>

Calling this method requires the existence of an enclosing .

Return values

array<string|int, mixed> —

Array which contains status messages. Each entry is an array containing the status message parameters.

postModifyActions()

Allows the module to run commands after the LDAP entry is changed or created.


    public
                    postModifyActions(bool $newAccount, array<string|int, mixed> $attributes) : array<string|int, mixed>

Calling this method requires the existence of an enclosing .

Parameters

$newAccount : bool: new account
$attributes : array<string|int, mixed>: LDAP attributes of this entry

Return values

array<string|int, mixed> —

array which contains status messages. Each entry is an array containing the status message parameters.

postModifySelfService()

Allows the module to run commands after the LDAP entry is changed or created.


    public
                    postModifySelfService(bool $newAccount, array<string|int, mixed> $attributes) : bool

Parameters

$newAccount : bool: is new account or existing one
$attributes : array<string|int, mixed>: LDAP attributes of this entry

Return values

bool —

true, if no problems occurred

preDeleteActions()

Allows the module to run commands before the LDAP entry is deleted.


    public
                    preDeleteActions() : array<string|int, mixed>

Calling this method requires the existence of an enclosing .

Return values

array<string|int, mixed> —

Array which contains status messages. Each entry is an array containing the status message parameters.

preModifyActions()

Allows the module to run commands before the LDAP entry is changed or created.


    public
                    preModifyActions(bool $newAccount, array<string|int, mixed> &$attributes) : array<string|int, mixed>

Calling this method requires the existence of an enclosing .

The modification is aborted if an error message is returned.

Parameters

$newAccount : bool: new account
$attributes : array<string|int, mixed>: LDAP attributes of this entry (added/modified attributes are provided as reference, handle modifications of $attributes with care)

Return values

array<string|int, mixed> —

array which contains status messages. Each entry is an array containing the status message parameters.

preModifySelfService()

Allows the module to run commands before the LDAP entry is changed or created.


    public
                    preModifySelfService(bool $newAccount, array<string|int, mixed> $attributes) : bool

An error message should be printed if the function returns false.

Parameters

$newAccount : bool: is new account or existing one
$attributes : array<string|int, mixed>: LDAP attributes of this entry

Return values

bool —

true, if no problems occurred

process_attributes()

This function processes user input.


    public
                    process_attributes() : array<string|int, mixed>

Return values

array<string|int, mixed> —

Array which contains status messages. Each entry is an array containing the status message parameters.

runGlobalCronActions()

Runs any global cron actions.


    public
                    runGlobalCronActions(bool $isDryRun) : void

Parameters

$isDryRun : bool: dry-run active

Return values

void —

save_attributes()

Returns a list of modifications which have to be made to the LDAP account.


    public
                    save_attributes() : array<string|int, mixed>

Calling this method requires the existence of an enclosing .

This function returns an array with 3 entries:
array( DN1 ('add' => array($attr), 'remove' => array($attr), 'modify' => array($attr)), DN2 .... )
DN is the DN to change. It is possible to change several DNs (e.g. create a new user and add him to some groups via attribute memberUid)

"add" are attributes which have to be added to the LDAP entry
"remove" are attributes which have to be removed from the LDAP entry
"modify" are attributes which have to be modified in the LDAP entry
"notchanged" are attributes which stay unchanged
"info" values with informational value (e.g. to be used later by pre/postModify actions)

This builds the required commands from $this-attributes and $this->orig.

Return values

array<string|int, mixed> —

list of modifications

supportsAdminInterface()

Specifies if this module supports the LAM admin interface.


    public
                    supportsAdminInterface() : bool

The LAM admin interface are the pages that allow to manage e.g. users and groups. In contrast there is also the LAM self service interface. Most modules support the admin interface.

Return values

bool —

support admin interface

supportsGlobalCronJob()

Specifies if the module supports global cron job actions.


    public
                    supportsGlobalCronJob() : bool

Return values

bool —

supports cron

addDoubleSelectionArea()

Adds an area with two multi-select fields with buttons to move items from right to left and vice-versa.


    protected
                    addDoubleSelectionArea(htmlResponsiveRow &$container, string $labelFirst, string $labelSecond, array<string|int, string> $optionsFirst, array<string|int, string> $selectedFirst, array<string|int, string> $optionsSecond, array<string|int, string> $selectedSecond, string $namePrefix[, bool $rightToLeftText = false ][, bool $showFilter = false ]) : mixed

The options of the selects must be presorted.
Names:

First select: $namePrefix_1
Second select: $namePrefix_2
Button move left: $namePrefix_left
Button move right: $namePrefix_right

Parameters

$container : htmlResponsiveRow: row
$labelFirst : string: label of first select
$labelSecond : string: label of second select
$optionsFirst : array<string|int, string>: options of first select ('label' => 'value')
$selectedFirst : array<string|int, string>: selected options of first select
$optionsSecond : array<string|int, string>: options of first select ('label' => 'value')
$selectedSecond : array<string|int, string>: selected options of second select
$namePrefix : string: prefix for select field and button names
$rightToLeftText : bool = false: sets the text direction in select to right to left
$showFilter : bool = false: displays a live filter

Return values

mixed —

addMultiValueInputTextField()

Adds a text input field that may contain multiple values to the given htmlResponsiveRow.


    protected
                    addMultiValueInputTextField(htmlResponsiveRow &$container, string $attrName, string $label[, bool $required = false ][, int $length = null ][, bool $isTextArea = false ][, array<string|int, mixed> $autoCompleteValues = null ][, int $fieldSize = null ][, array<string|int, mixed> &$htmlIDs = null ][, string $cssClasses = '' ]) : mixed

The field name will be the same as the attribute name plus a counting number (e.g. street_0). The last field will be followed by a button to add a new value. This is named add_{attribute name} (e.g. add_street). There must be a help entry with the attribute name as ID. A new line will also be added after this entry so multiple calls will show the fields one below the other.

Parameters

$container : htmlResponsiveRow: parent container
$attrName : string: attribute name
$label : string: label name
$required : bool = false: this is a required field (default false)
$length : int = null: field length
$isTextArea : bool = false: show as text area (default false)
$autoCompleteValues : array<string|int, mixed> = null: values for auto-completion
$fieldSize : int = null: field size
$htmlIDs : array<string|int, mixed> = null: reference to array where to add the generated HTML IDs of the input fields
$cssClasses : string = '': additional CSS classes of input fields

Return values

mixed —

addMultiValueSelectField()

Adds a select field type that may contain multiple values to the given htmlTable.


    protected
                    addMultiValueSelectField(htmlResponsiveRow &$container, string $attrName, string $label, array<string|int, mixed> $options[, bool $hasDescriptiveOptions = false ][, bool $required = false ][, int $fieldSize = 1 ][, array<string|int, mixed> &$htmlIDs = null ]) : mixed

Parameters

$container : htmlResponsiveRow: parent container
$attrName : string: attribute name
$label : string: label name
$options : array<string|int, mixed>: options for the selects
$hasDescriptiveOptions : bool = false: has descriptive options
$required : bool = false: this is a required field (default false)
$fieldSize : int = 1: field size
$htmlIDs : array<string|int, mixed> = null: reference to array where to add the generated HTML IDs of the input fields

Return values

mixed —

addMultiValueSelfServiceTextField()

Adds a simple text input field for the self service.


    protected
                    addMultiValueSelfServiceTextField(array<string|int, mixed> &$container, string $name, string $label, array<string|int, mixed> &$fields, array<string|int, mixed> &$attributes, array<string|int, mixed> &$readOnlyFields[, bool $required = false ][, bool $isTextArea = false ][, string $attributeName = null ]) : mixed

The field name will be the same as the class name plus "_" plus attribute name (e.g. posixAccount_cn).

Parameters

$container : array<string|int, mixed>: array that is used as return value for getSelfServiceOptions()
$name : string: attribute name (== field name)
$label : string: label to display in front of input field
$fields : array<string|int, mixed>: list of active fields
$attributes : array<string|int, mixed>: attributes of LDAP account
$readOnlyFields : array<string|int, mixed>: list of read-only fields
$required : bool = false: field is required
$isTextArea : bool = false: display as text area
$attributeName : string = null: attribute name (defaults to $name)

Return values

mixed —

addSimpleInputTextField()

Adds a simple text input field to the given htmlResponsiveRow.


    protected
                &    addSimpleInputTextField(htmlResponsiveRow &$container, string $attrName, string $label[, bool $required = false ][, int $length = null ][, bool $isTextArea = false ][, array<string|int, mixed> $autoCompleteValues = null ]) : mixed

The field name will be the same as the attribute name. There must also be a help entry with the attribute name as ID. A new line will also be added after this entry so multiple calls will show the fields one below the other.

Parameters

$container : htmlResponsiveRow: parent container
$attrName : string: attribute name
$label : string: label name
$required : bool = false: this is a required field (default false)
$length : int = null: field length
$isTextArea : bool = false: show as text area (default false)
$autoCompleteValues : array<string|int, mixed> = null: values for auto-completion

Return values

mixed —

reference to htmlResponsiveInputField/htmlResponsiveInputTextarea

addSimplePDFField()

Adds a simple PDF entry to the given array.


    protected
                    addSimplePDFField(array<string|int, mixed> &$result, string $name, string $label[, string $attrName = null ][, string $delimiter = ', ' ]) : mixed

Parameters

$result : array<string|int, mixed>: result array (entry will be added here)
$name : string: ID
$label : string: label name
$attrName : string = null: attribute name (default: =$name)
$delimiter : string = ', ': delimiter if multiple attribute values exist (default: ", ")

Return values

mixed —

addSimpleReadOnlyField()

Adds a simple read-only field to the given container.


    protected
                    addSimpleReadOnlyField(htmlResponsiveRow &$container, string $attrName, string $label) : mixed

Parameters

$container : htmlResponsiveRow: parent container
$attrName : string: attribute name
$label : string: field label

Return values

mixed —

addSimpleSelfServiceTextField()

Adds a simple text input field for the self service.


    protected
                    addSimpleSelfServiceTextField(array<string|int, mixed> &$container, string $name, string $label, array<string|int, mixed> &$fields, array<string|int, mixed> &$attributes, array<string|int, mixed> &$readOnlyFields[, bool $required = false ][, bool $isTextArea = false ][, string $attributeName = null ]) : mixed

The field name will be the same as the class name plus "_" plus attribute name (e.g. posixAccount_cn).

Parameters

$container : array<string|int, mixed>: array that is used as return value for getSelfServiceOptions()
$name : string: attribute name (== field name)
$label : string: label to display in front of input field
$fields : array<string|int, mixed>: list of active fields
$attributes : array<string|int, mixed>: attributes of LDAP account
$readOnlyFields : array<string|int, mixed>: list of read-only fields
$required : bool = false: field is required
$isTextArea : bool = false: display as text area
$attributeName : string = null: attribute name (defaults to $name)

Return values

mixed —

checkMultiValueSelfServiceTextField()

Checks the input value of a self service multi-value text field.


    protected
                    checkMultiValueSelfServiceTextField(array<string|int, mixed> &$container, string $name, array<string|int, mixed> &$attributes, string $fields, array<string|int, mixed> &$readOnlyFields[, string $validationID = null ][, array<string|int, mixed> $validationMessage = null ][, array<string|int, mixed> $requiredMessage = null ][, string $attributeName = null ]) : mixed

The field name must be the same as the class name plus "_" plus attribute name (e.g. posixAccount_cn). If validation is used then there must exist a message named [{attribute name}][0] (e.g. $this->messages['street'][0]).

Parameters

$container : array<string|int, mixed>: return value of checkSelfServiceOptions()
$name : string: attribute name
$attributes : array<string|int, mixed>: LDAP attributes
$fields : string: input fields
$readOnlyFields : array<string|int, mixed>: list of read-only fields
$validationID : string = null: validation ID for get_preg()
$validationMessage : array<string|int, mixed> = null: validation message data (defaults to $this->messages[$name][0])
$requiredMessage : array<string|int, mixed> = null: message data when no value is set by user (no check if null)
$attributeName : string = null: attribute name (defaults to $name)

Return values

mixed —

checkSimpleSelfServiceTextField()

Checks the input value of a self service text field.


    protected
                    checkSimpleSelfServiceTextField(array<string|int, mixed> &$container, string $name, array<string|int, mixed> &$attributes, string $fields, array<string|int, mixed> &$readOnlyFields[, string $validationID = null ][, array<string|int, mixed> $validationMessage = null ][, array<string|int, mixed> $requiredMessage = null ][, string $attributeName = null ]) : mixed

Parameters

$container : array<string|int, mixed>: return value of checkSelfServiceOptions()
$name : string: attribute name
$attributes : array<string|int, mixed>: LDAP attributes
$fields : string: input fields
$readOnlyFields : array<string|int, mixed>: list of read-only fields
$validationID : string = null: validation ID for get_preg()
$validationMessage : array<string|int, mixed> = null: validation message data (defaults to $this->messages[$name][0])
$requiredMessage : array<string|int, mixed> = null: message data when no value is set by user (no check if null)
$attributeName : string = null: attribute name (defaults to $name)

Return values

mixed —

getAccountContainer()

Returns the {@link accountContainer} object.


    protected
                    getAccountContainer() : accountContainer|null

Return values

accountContainer|null —

accountContainer object

getSelfServiceLabel()

Returns the field label. This can be either the given default label or an override value from profile.


    protected
                    getSelfServiceLabel(string $fieldID, string $defaultLabel) : string

Parameters

$fieldID : string: field ID
$defaultLabel : string: default label text

Return values

string —

label

isBooleanConfigOptionSet()

Returns if the given configuration option is set.


    protected
                    isBooleanConfigOptionSet(string $optionName[, bool $default = false ]) : bool

This function returns false if the configuration options cannot be read.

Parameters

$optionName : string: name of the option
$default : bool = false: default value if config option is not set at all (default: false)

Return values

bool —

true if option is set

mapSimpleUploadField()

Maps simple upload fields directly to LDAP attribute values.


    protected
                    mapSimpleUploadField(array<string|int, mixed> &$rawAccounts, array<string|int, mixed> &$ids, array<string|int, mixed> &$partialAccounts, string $position, string $colName, string $attrName[, string|array<string|int, string> $regex = null ][, array<string|int, mixed> $message = [] ][, array<string|int, mixed> &$errors = [] ][, string $regexSplit = null ]) : mixed

Parameters

$rawAccounts : array<string|int, mixed>: the user input data, contains one subarray for each account.
$ids : array<string|int, mixed>: list of IDs for column position (e.g. "posixAccount_uid" => 5)
$partialAccounts : array<string|int, mixed>: list of hash arrays (name => value) which are later added to LDAP
$position : string: current position in CSV
$colName : string: column name
$attrName : string: LDAP attribute name
$regex : string|array<string|int, string> = null: for get_preg() (e.g. 'ascii')
$message : array<string|int, mixed> = []: error message to add if regex does not match
$errors : array<string|int, mixed> = []: list of error messages if any
$regexSplit : string = null: multiple values are separated and can be split with this preg_split expression (e.g. "/;[ ]?/")

Return values

mixed —

processMultiValueInputTextField()

Validates a multi-value text field.


    protected
                    processMultiValueInputTextField(string $attrName, array<string|int, mixed> &$errors[, string $validationID = null ][, bool $required = false ]) : mixed

The input fields must be created with function addMultiValueInputTextField(). If validation is used then there must exist a message named [{attribute name}][0] (e.g. $this->messages['street'][0]).

Parameters

$attrName : string: attribute name
$errors : array<string|int, mixed>: errors array where to put validation errors
$validationID : string = null: validation ID for function get_preg() (default: null, null means no validation)
$required : bool = false: the field is required (default: false)

Return values

mixed —

processMultiValueSelectField()

Validates a multi-value select field.


    protected
                    processMultiValueSelectField(string $attrName) : mixed

The select fields must be created with function addMultiValueSelectField().

Parameters

$attrName : string: attribute name

Return values

mixed —

processSimpleTextInput()

Validates a text field.


    protected
                    processSimpleTextInput(string $attrName, array<string|int, mixed> &$errors[, bool $required = false ][, string $validationID = null ]) : mixed

If validation is used then there must exist a message named [{attribute name}][0] (e.g. $this->messages['street'][0]).

Parameters

$attrName : string: attribute name
$errors : array<string|int, mixed>: errors array where to put validation errors
$required : bool = false: value required
$validationID : string = null: validation ID for function get_preg() (default: null, null means no validation)

Return values

mixed —

checkUploadRegex()

Checks the upload value against a list of regular expressions.


    private
                    checkUploadRegex(array<string|int, string> $regexIDs, string $value, array<string|int, mixed> $message, int $position, array<string|int, mixed> &$errors) : value

Parameters

$regexIDs : array<string|int, string>: regular expression IDs for get_preg()
$value : string: value to check
$message : array<string|int, mixed>: error message array if not matching
$position : int: upload position
$errors : array<string|int, mixed>: error messages

Return values

value —

is ok

courierMailAlias extends baseModule in package modules

Tags

Table of Contents

Constants

ATTRIBUTES_TO_IGNORE_ON_COPY_DEFAULT

Properties

$attributes

$autoAddObjectClasses

$messages

$meta

$moduleSettings

$orig

$selfServiceSettings

$base

$scope

Methods

__construct()

Parameters

Return values

addPDFImage()

Parameters

Return values

addPDFKeyValue()

Parameters

Return values

addPDFTable()

Parameters

Return values

build_uploadAccounts()

Parameters

Return values

can_manage()

Return values

canSelfServiceFieldBeReadOnly()

Parameters

Return values

canSelfServiceFieldBeRelabeled()

Parameters

Return values

check_configOptions()

Parameters

Tags

Return values

check_profileOptions()

Parameters

Tags

Return values

checkGlobalConfigOptions()

Parameters

Return values

checkSelfServiceOptions()

Parameters

Return values

checkSelfServiceSettings()

Parameters

Return values

delete_attributes()

Return values

display_html_attributes()

Return values

display_html_delete()

Tags

Return values

displaySpecialSelfServicePage()

Parameters

Tags

Return values

doUploadPostActions()

Parameters

Return values

doUploadPreActions()

Parameters

Return values

get_alias()

Tags

Return values

get_configOptions()

Parameters

Tags

Return values

courierMailAlias extends baseModule
in package

modules